Rotortex Texture Sprayer - Sprays Stucco!
Big Rig Power in a portable machine

Will Spray A Variety Of Materials Such As:

Smooth To Heavily Aggregated Texture Coating With Silica Sand, Perlite And Vermiculite. Wall Texture Finishes From Orange peel To Heavy Knockdown, Gypsum Materials, Simulated Acoustic, Stone paint, Deck Coating, Some Cement Base Materials, Monokote Mk-6 Fire Proofing And EIFS Products. 

* 20 Gallon Anti Spill Hopper (patent pending). 

* Variable Speed Control Box With Fwd & Rev . 

* Anti Lock Pump Design (patent pending). 

* Removable Control Box (patent pending). 

* Plug To A Regular 15Amp Receptacle. 

* Will Draw Only 4.2Amp @ Max Load. 

* Can Use Up to 100 Feet of Material Hose (Determined by viscosity). 

* Portable & Profitable.

* No Viscosity Check Needed. 

* Able To Spray Heavy Products. 

* Easy To Assemble or Disassemble. 

* The Quietest Sprayer Out There. 

* Washable, Wash-Down Electric Motor. 

* Heavy Duty Timing Belt Power Transfer. 

* Performance Like a Big Rig Without The Cost. 

* Special Base For Gas or Electric Air Power Pack (patent pending). 

Sprayer Includes: 3/4” Id x 50’ x 300 psi Material Hose, 3/8” Id x 50’ x 250 psi Air Hose, 50’ Electric Control Cord, Trigger Gun With 4 Spray Tips, Removable Control Box Fine Finish Spray Tip (available)

CLICK HERE FOR ORDER INFORMATION AND MORE TEXTURE SPRAYERS

THE EZ-TEX™ DX Series Texture Sprayer

Will Spray A Variety Of Finish Texture Coatings, Gypsum Materials, Elastomerics, Fire Proofing, Firestop Products, Water Base Roof Coating, Cement Base Deck Finishes, Exterior Color Coat, Excellent For Orange Peel Knockdown Application and Exterior Finishes..

They have been designed with the hard working contractor in mind. Knowing that you will need a reliable product, our machines have been subjected to hundreds of hours of testing and we are proud to boast over 100,000 gallons of trouble free spraying. However, these test results were of no surprise to us since we use only the best, U.S.A. made components. They have been favorably used by professionals who know quality components. Also, since the EZ-TEX line of pumps are made with well known components, you will have no problem finding parts anywhere in the U.S.A.

For example! Our ARO diaphragm pump, is as relevant today as the day it came out to the market, ARO is the sole owner of the technology and the title: Unstallable Air Valve Design, ARO uses no magnets, springs, reset buttons, or other secondary actuators to insure pump shifting- Only Air.

THE EZ-TEX™ DX Electric Texture Sprayer

WILL SPRAY A VARIETY OF TEXTURE COATINGS, GYPSUM, INCLUDING ELASTOMERICS AND MK-6 MONOKOTE FIRE PROOFING, WALL TEXTURE ORANGE PEEL & KNOCKDOWN APPLICATION.

Stainless Steel Frame
Stainless Steel Removable Strainer In Hopper For Safer Operation, Long Life And Easy Clean Up.
Two Side Handles For Easy Hopper Lifting.
15 Gallon Molded Plastic Hopper With 1" On/Off Valve & Quick Disconnect For Faster Setup & Cleaning. No Screws No Bolts & No Tools Needed. Hopper Includes Limited Lifetime Warranty.
7" X 2.5" Storage Tray In Hopper With Stainless Steel Cover.

Double Diaphragm Texture Pump Delivers Max 30 Gpm At 100 P.S.I., Sprays Interior Texture Up To 6 G.P.M. At 80 P.S.I. With Max 100 P.S.I. Operating Pressure. For Water Base Use Only! (Some Thinning May Be Required).

Compressor Will Shut Off Automatically When Not Used.

High Output Dual Piston Oil less Air Compressor Produces 11.9 CFM, No Maintenance Required (No Oil Change Required).

Two Air Outlets Allow For Connection Of Additional External Compressor.

1.5 H.P. Thermally Overload Protected, Brushless 120/240 Volt Ac 60/50 Hz 15/13 Amp Motor.

• Weight Approximately 145 Lb. Complete, (Without Hopper & Hoses 125 Lb.).
  Top-notch, Two Years Limited Warranty. Covers All Parts (Excluding Consumable Components) and All Repairs, Including Labor. Some Limitations Apply, Call for More Info.
  
  EZ-TEX DX Texture sprayer . . . . . Includes:
• The lightweight BES gun (2 lb) With stainless steel needle, adjustable needle travel, trigger lock, air on/off valve, air flow control & quick disconnect fittings.
• 4 different round spray fan tips: 1/8", 3/16", 1/4" and 5/16"
• 25 ft. x 1" material hose & 25 ft. 3/8" air hose (3/4" material hose available with spacial order.) A special material quick fitting is available for a total of 50 ft. combination material hose. Hoses come with heavy duty quick disconnect connectors for easy setup
• 25 ft. 12 gauge electrical cord supplied for convenience at work
• Funnel to check mixture flow
• Optional BES modular pole gun 15" to 50" long with 4 tip sizes available

EZ-TEX™ DXG Gas Texture Sprayer. Excellent For Exterior Finishes. Will Spray A Variety Of Finish Texture Coatings, Gypsum Materials, Elastomerics, Fire Proofing, Firestop Products, Water Base Roof Coating, Cement Base Deck Finishes, Exterior Color Coat, Excellent For Orange Peel And Knockdown Application. (Must Be Used In A Well Ventilated Area).

Same basic features included above except with gas engine. The Portable EZ-TEX™ DXG Includes 5.5hp Honda Engine. Direct Drive Commercial Twin Piston Compressor Will Deliver Air Up To 18 CFM.
At Only 140lb. The Light Weight DXG Model Will Provide You With Flexibility And Portability To Work Anywhere Electricity Is Not Available.

The EZ-TEX™ DXG Can Easily Adapt 5 Gallon Or 55 Gallon Pick Up Hose, P/N 18-005 And 18-055 (Special Order Required). The Siphon Tube Feature Allows Use With Solvent Materials And Easy Clean-Out.

The EZ-TEX™ DX And The EZ-TEX™ XT Units Include one 1”X25' Material Hose With Internal Expansion Fitting, Allows Easy Flow With Heavy Viscous Materials & Large Aggregate.