PRATT & LAMBERT PAINTS The Quality Advantage... in Architectural Finishes Since 1849 PRODUCT INFORMATION Endu-thane High Build Urethane (S28-line) Endu-thane High Build Urethane is a durable, high gloss urethane coating that combines superb corrosion and chemical resistance with the attractiveness of high gloss coatings. When used with the recommended epoxy or zinc rich epoxy primer, Endu-thane topcoats provide outstanding resistance to: ABRASION: Excellent resistance and good inter-coat adhesion. SOLVENTS: Excellent resistance to splash and spillage of many organic solvents including xylene, alcohols, gasoline,oils and mineral spirits. FRESH & SALT WATER: Excellent resistance in coastal and marine environments. ACIDS & ALKALIES: Excellent resistance to splash and spillage. Endu-thane's high build properties mean economy. In a 10 mil thick system, all that is needed is one coat of a suitable primer and one coat of Endu-Thane High Build Urethane. Endu-thane, unlike conventional urethane finishes, has increased durability in regard to weathering and gloss retention. Recommended Uses: Endu-thane is suggested for use on tanks, transportation equipment and other equipment and structures in chemical plants and manufacturing facilities. It is especially recommended when an attractive appearance is of particular importance. Temperature Resistance: 300°F (149°C) dry heat Kit Description: 5 GALLON KIT: Base Component (S28-line) is 4.29 gallons (16.73liters) in a 5 gallon container. Activator Component (S2898) is 90.9 fluid ounces(2.69 liters) in a 1 gallon container.1 GALLON KIT: Base Component (S28-line) is 110 fluid ounces (3.25liters) in a 1 gallon container. Activator Component (S2898) is 18 fluid ounces (532milliliters) in a quart can. TECHNICAL DATA TYPE: Polyurethane COMPONENTS: two COLORS: White, Black, Clear and tinting bases. GLOSS: high FLASH POINT: 28°F (-2°C) SOLIDS BY VOLUME: 60% (approximate) VOC: maximum 3.5Ibs/gal (420 g/1) after thinning RECOMMENDED FILM THICKNESS: 4-6 dry mils (100-150 microns) SPREADING RATE: Theoretical is 160 square feet per gallon for 6 mils dry film or 241 square feet per gallon for 4 mils dry film thickness. SURFACE PREPARATION: Apply over recommended Pratt &Lambert primer or approved equivalent. Surfaces must be clean,dry and at least 5°F (3°C) above the dew point. Old, well cured coatings should be randomly spot tested for compatibility. MIXING: Add 1 part Activator Component (S2898) to 6 parts Base Component (S28-line). Mix well and use immediately. POT LIFE: 6 hrs. @ 77°F (25°C) SHELF LIFE: 1 year @ 40°-90°F (4°-32°C) APPLICATION: Brush, roller or spray. If roller applied, use a quality Lamb's Wool 1/4" Nap Roller and after mixing base and activator components, add 10% by volume of Endu-Thane brush and roller additive (S2822) to the activated material while agitating. Should be applied with a minimum air temperature of 40°F (4°C). DO NOT apply when surface temperature is less than 5°C (3°C) above the dew point. Suggested spray equipment: CONVENTIONAL--DeVilbiss MBC-510 gun with "E" fluid tip and #64 air cap. Adjust pressure as needed. AIRLESS--28:1 or 30:1 ration pump with .015 to .019 tip. Adjust pressure as needed. DRY TIME: @ 77°F (25°C) & 50% Relative Humidity: To touch....................1 hr. To handle...................6 hrs. PRIMERS: Steeltec OZR Primer (S3297), Poxy-gard Rust Inhibitive Primer (S3301) or Poxy-gard HB Epoxy MasticPrimer (S3508) THINNING: No reduction necessary for brush or roller. Normally not reqired for airless spray, however, may use a maximum of 5% Thinner (S6682) per gallon of paint. For Conventional Spray, may thin with Thinner (S6682) up to 10% per gallon of paint. CLEAN UP: Thinner Blend (S6682)   FOR PROFESSIONAL USE ONLY Pratt & Lambert, Inc. "Technical services, advice, and recommendations are rendered free. They are based on technical data which we believe to be reliable and are intended for use by persons having skill and know how, at their own discretion and risk We assume no resibnsitilfoy rer ltsu s bt oneaiord am desagnc ireurfrd tomirhese uy be thyeBuinr ho w oleinr in part "   Pratt & Lambert Industrial Product Index SPECTRA PAINT CENTERS HOME Electronic Mail: mail@spectrapaint.com Copyright © 1999 Spectra Paint Centers All rights reserved.